These are from a limited run of Keir Fraser’s Greaseweazle, specifically the STM32F730-based model using George R. Mezzomo’s PCB layout, v1.1. These come fully assembled, or, if you think you’re good at surface mount work, as a bare PCB. In the interest of growing the Greaseweazle community, these devices are sold at cost - no profit.
Be sure to pick the right item below. If you purchase the PCB, you will receive only the PCB and must purchase all components yourself. Do NOT purchase this bare PCB unless you have the skills necessary to build it, or you have access to a competent electronics technician who can build it for you!
- Layers: 2
- PCB Thickness: 1.6mm
- Surface Finish: HASL-RoHS
- Copper Weight: 1 oz
- Fully Probe Tested: Yes
- Schematics, Gerbers, BOM, & Software: Available on GitHub
The 34-pin header connects to a ribbon cable, which in turn connects to your floppy drive.
The 4-pin white header at the top right is for power. Connect this to the same power supply as your floppy drive.
The silver connector at the bottom-right is a USB B connector (square). Supply your own USB 2.0 B-to-A cable to connect to most modern computers.
The other 0.1" headers are for programming, serial access, and bootstrapping, respectively, and shouldn’t be needed unless you are flashing a new firmware onto your Greaseweazle.
Greaseweazle F7 Batch 2
Batch 2 is 10 units, and will enter production once at least 5 fully-assembled orders have been placed.
Shipping date TBD. As of 2020-09-11, 2 orders have been placed for Batch 2, but only 1 is fully assembled. Email will be sent once the threshold has been met.
All packages will be sent by Canada Post. You’ll have the option to select tracking if you want it. If you are looking for faster/alternative delivery, please contact us directly and do not use the links above.