Skip to main content

SCSI2SD.CA

Emulate SCSI devices with an SD memory card.

We are Canada's authorized reseller of ZuluSCSI and SCSI2SD products.

2022.11.05: The new ZuluSCSI RP2040 now outperforms the older SCSI2SD v5 and v6 devices, and is compatible with more systems. We anticipate the manufacturer will discontinue the original SCSI2SD devices soon, if they have not already. Long live the ZuluSCSI!

NEW! ZuluSCSI RP2040

Read more about the new ZuluSCSI in our blog post.

  • Based on the proven SCSI2SD design

  • Emulates up to 7 drives or CD-ROMs

  • Fastest yet, up to 9.5 MB/s read, 2+ MB/s write

  • SCSI-1 and SCSI-2 compatible, supports sync and async transfers

  • DIP switch for simple hardware setup

  • Easy, SD-card based configuration & upgrades

  • Self-powered via SCSI termination power on pin 25

  • Mounts with our bracket in an internal 3.5" drive bay

Optional Floppy Power Header

ZuluSCSI runs off of bus termination power, supplied by your host computer.

Certain older machines do not supply bus termination power, such as certain Macintoshes.

If you know your machine does not provide terminator power, or are worried about compatibility, add this option to your ZuluSCSI order and we will solder this 4-pin power connector onto your unit before shipping.

ZuluSCSI Mini RP2040

  • External ZuluSCSI

  • Up to 9.5 MB/s read, 2+ MB/s write

  • Always-on active termination

  • Jack ("male") DB-25 SCSI connector

  • 5V power via microUSB connector or self-powered via SCSI termination power on pin 25

  • microSD card slot

  • Injection-molded ABS plastic case

  • Dimensions: 75 x 55 x 18 mm

ZuluSCSI Laptop RP2040 2.5"

  • 2.5" wide ZuluSCSI RP2040

  • Intended for use with SCSI PowerBooks, ThinkPads, etc.

  • Up to 9.5 MB/s read, 2+ MB/s write

  • 5V power via microUSB connector or self-powered via SCSI termination power on pin 25

  • microSD card slot

Internal SCSI Cable

Connect your new internal SCSI2SD or ZuluSCSI device to your computer.

  • Pick from 30cm, 60cm, or 90cm (1, 2, or 3 feet) in length

  • 2 50-pin connectors with flash gold conductors

  • Strain relief on connectors

  • Works with all internal SCSI2SD or ZuluSCSI devices

If you would like a different length, or more connectors, please contact us. Turnaround time is typically 1-2 business days.

3.5" Mounting Bracket

  • 3D printed bracket for:

    • ZuluSCSI RP2040

    • ZuluSCSI v1.1

    • SCSI2SD v5.2 ( not v5.5)

    • SCSI2SD v6

  • Mounts in an internal 3.5" drive bay

  • Includes 4x mounting screws

  • Available in black plastic

Resources

ZuluSCSI

SCSI2SD